Data transmission systems for Ethernet technology

Advantages

• LAN cables for structured cabling systems according to EN50173 and ISO/IEC 11801

Application areas

• They are used in places with a large amount of terminal equipment.
• For installation of wiring in office and administrative buildings and design bureaus (floor wiring).
• The length of cables for the horizontal subsystem in buildings must not exceed 100 m (90 m in the cable duct + 10 m at the workplace) in accordance with ISO/IEC 11801 and EN 50173 standards

Characteristics

• Transmission of digital and analog signals
• IEEE 802.3: 10/100/1000Base-T, 10GBase-T IEEE 802.5: ISDN; FDDI; ATM; cable sharing IEEE 802.3at: PoE, VoIP support
• Self-extinguishing according to IEC 60332-1-2
• The cables do not spread combustion when laid in a bundle according to IEC 60332-3-25 (spread of combustion along a vertical cable or bundle of cores)

Standards / Certificates of Conformity

• Lapp Kabel's CAT.7A LAN cables for "structured cabling systems" meet the requirements of EIA/TIA-568 and TSB36 standards, as well as ISO/IEC 11801 and EN 50173 (class FA - permanent channel).

Design

• Single-wire conductor 4x2xAWG23/1, duplex 2x(4x2xAWG23/1)
• Insulation of cores: PE
• S/FTP: Overall screen in the form of a braid of copper wires and a screen per pair of aluminum foil
• Outer shell: halogen-free flame retardant composition
• Color: yellow (RAL 1021)

Industrial Ethernet Cat. 7 cable, torsion-rated (±180°); 4 pairs; PUR outer jacket, CMX approval; 4x2xAWG24/7 structure; PROFINET Type C

• For rotating products (±180°)
• 4-pair, for PROFINET applications
• Cat.7 for 10 Gbps

Advantages

• For Industrial Ethernet applications such as PROFINET networks, fixed installations or flexible/torsional applications
• 4-pair: 100 Mbps to 10 Gbps for industrial Ethernet
• High quality screen for
  areas with electromagnetic load
• Industrial Ethernet cables for extreme environments

Application areas

• For wiring in horizontal and vertical subsystems in industrial conditions according to EN 50173-3
  ISO/IEC 24702
• Mechanical engineering, instrument making, installation of electrical distribution cabinets
• Max. cable length for 100 Mbps: 85 m
  Max. cable length for 10 Gbps speed: 85 m
• Suitable for EtherCAT and EtherNet/IP networks

Characteristics

• Halogen-free according to IEC 60754-1
• Oil-resistant according to IEC 60811-2-1
• The overall shield protects against electromagnetic fields and ensures reliable signal transmission.
• The cable withstands torsional loads. Tested with over 5 million bending and torsion cycles at 180°/m.

Standards / Certificates of Conformity

• Electrical requirements according to IEC 61156-6
• UL/CSA (CMX) Certification
• UL-AWM Style 21576
• Self-extinguishing according to IEC 60332-1-2

Design

• 7-wire cores made of tinned copper wires
• Polyethylene insulation of wires
• S/FTP: Overall screen in the form of a braid of copper wires and a screen per pair of aluminum foil
• Outer shell made of polyurethane
• Colour: green (similar to RAL 6018)

Industrial Ethernet Cable Cat. 7, Flexible, 4-Pair, PUR Outer Jacket, UL Listed, 4x2xAWG26/7 Construction

• Significantly simplifies cable installation in confined spaces due to the optimal outer diameter of the cable
• Cat.7 for 10 Gbps

Advantages

• For use in dry or damp environments
• Shielded, interference-protected
• Industrial Ethernet cables for extreme environments
• 4-pair: 100 Mbps to 10 Gbps for industrial Ethernet

Application areas

• Mechanical engineering, instrument making, installation of electrical distribution cabinets
• The maximum cable length for speeds up to 10 Gbps is 60 m.
• Suitable for EtherCAT and EtherNet/IP networks

Characteristics

• Outer shell made of polyurethane (PUR), resistant to mineral oils and wear
• Wear-resistant and halogen-free outer sheath
• The overall shield protects against electromagnetic fields and ensures reliable signal transmission.

Standards / Certificates of Conformity

• Halogen-free according to VDE 0472-815
• Electrical requirements according to IEC 61156-6
• AWM certification for Canada and the United States
• UL-AWM Style 21576
• Flame retardant according to IEC 60332-1-2

Design

• 7-wire copper core
• Polyethylene insulation of wires
• S/FTP: Overall screen in the form of a braid of copper wires and a screen per pair of aluminum foil
• Outer shell made of polyurethane
• Colour: green (similar to RAL 6018)