Technical data of KFD2-STC5-1
| Main Features | ||
|---|---|---|
| Signal type | Analog input | |
|
Parameters related to functional safety |
||
| Safety Integrity Level (SIL) | SIL 2 | |
| Systematic Capabilities (SC) | SC 3 | |
|
Supply |
||
| Connection | Power bus or terminals 14+, 15- | |
| Nominal voltage | 18...30 V DC | |
| Pulsation | within the delivery tolerance | |
| Power dissipation | ≤ 1 W at maximum load | |
| Power consumption | ≤ 1.6 W at maximum load | |
|
Entrance |
||
| Connection side | side of the field | |
| Connection | terminals 1+, 2-, 3 | |
| Input signal | 4 ... 20 mA | |
| Open circuit voltage/short circuit current | terminals 1+, 3: 23 V/25 mA | |
| Input impedance | Max 265 Ohm, Terminals 2-, 3, Max 330 Ohm Terminals 1+, 3 | |
| Available voltage | ≥ 16 V at 20 mA; ≥ 20 V at 4 mA, terminals 1+, 3 | |
|
Exit |
||
| Connection side | control side | |
| Connection |
terminals 7+, 8-, 9- (receiver) terminals 7-, 8+, 9+ (source) see additional information |
|
| Load | 0...800 Ohm | |
| Output signal | 4...20 mA (overload> 25 mA) | |
| Pulsation | Max. 50 µA eff. | |
| External power supply (circuit) |
2 ... 30 V DC current If the external voltage is > 19 V, a load ≥ ((V - 19) / 0.02) Ω is required. V represents the value of the external voltage. An internal 250 ohm resistor at terminal 9 can be used as a load. |
|
|
Transfer characteristics |
||
| Deviation |
at 20 °C (68 °F), 4...20 mA ≤ 10 µA incl. calibration, linearity, hysteresis, loads and supply voltage variations |
|
|
|
The influence of ambient temperature | ≤ 0.25 μA/K |
| Frequency range |
input-output: bandwidth with signal swing 0.5 V 0...7.5 kHz (-3 dB) output-input: bandwidth with signal swing 0.5 V 0.3 ... 7.5 kHz (-3 dB) |
|
| Settlement time | 200 µs | |
| Rise time/fall time | 100 µs | |
|
Galvanic isolation |
||
| Input, output | Basic insulation according to IEC 61010-1, rated insulation voltage 300 V eff. | |
| Input/Power Supply | Basic insulation according to IEC 61010-1, rated insulation voltage 300 V eff. | |
| Output/power supply | functional insulation, rated insulation voltage 50 V AC | |
|
Indicators/settings |
||
| Display elements | LED | |
| Marking | marking space at the front | |
|
Compliance with the directive |
||
| Electromagnetic compatibility |
|
|
|
|
Directive 2014/30/EU | EN 61326-1:2013 (industrial premises) |
|
Correspondence |
||
| Electromagnetic compatibility |
NE 21:2012 EN 61326-3-2:2008 |
|
| Degree of protection | IEC 60529:2001 | |
| Protection against electric shock | UL 61010-1:2012 | |
|
Environmental conditions |
||
| Ambient temperature | -20...70°С (-4...158°F) | |
|
Mechanical characteristics |
||
| Degree of protection | IP20 | |
| Connection | screw terminals | |
| weight | approx. 200 g | |
| Dimensions | 20 x 124 x 115 mm (0.8 x 4.9 x 4.5 in) (W x H x D), case type B2 | |
| Installation | on a 35 mm DIN mounting rail in accordance with EN 60715:2001 | |