Our IEC 1492 screw terminal blocks with earthing provide an easily recognizable, convenient and neatly organized earthing strip that is mounted on a DIN rail.
Terminal blocks
Our Bulletin 1492 screw terminal blocks with internal components feature fixed electronic components. Component blocks are available with a forward-facing diode, a reverse-facing diode, a surge suppressor, or resistors with a range of values.
Our IEC Bulletin 1492 insulated screw terminal blocks provide an easier and more convenient way to open a circuit without rewiring.
Our Bulletin 1492 mini-blocks. IEC screw terminal blocks are standard single- and double-level feed-through and grounding blocks. These robust terminal blocks are available in a wide range of colors and are smaller in size.
Our IEC 1492 series multi-circuit feed-through screw terminal blocks are ideal for applications where control signals must be distributed and collected using the same blocks. These blocks are an excellent solution for high-density wiring and are available in nine colors.
Our IEC screw terminal blocks for disconnecting and installing neutrals offer increased safety, as no tools are required to open or close the circuit. This system works with a series of feed-through circuits, ground circuits, and circuits with direct connections to a busbar that runs the entire length of the terminal blocks, to a junction block mounted further down the rail for isolated neutral connection.
Our IEC 1492 push-in screw terminal blocks allow you to connect discrete electronic components, fuses for circuit protection, or disconnect plugs for circuit isolation in applications where space is limited.
Our Bulletin 1492-JP Process IEC screw terminal blocks are designed specifically for process distribution network applications to save 45% panel space and improve signal routing and distribution performance.
Our IEC 1492 series screw terminal blocks for sensors conveniently provide all the connections needed for three-wire applications in a single terminal block. This design helps you save panel space.
Our single-circuit screw terminal blocks with IEC Bulletin 1492 neutral disconnect switch provide increased safety thanks to a disconnect switch that requires a tool to open or close the circuit. This block is connected to a busbar running the entire length of the terminal blocks and to a junction block mounted further down the rail for isolated neutral connection.
Our compact IEC 1492 series feed-through screw terminal blocks are compact terminal blocks with multi-wire capability for single-circuit applications. We offer these terminal blocks in nine colors and several sizes to meet your wiring requirements.
Our compact IEC 1492 series screw terminal blocks provide an easily recognizable, convenient and neatly organized DIN rail mounted grounding strip.
Our specialized IEC 1492-compliant feed-through screw terminal blocks are equipped with test plugs and adapters that detect the presence of voltage and perform simple diagnostic voltage measurements. Feed-through terminal blocks are available with a test plug that interrupts the circuit, forcing current to flow through a meter connected to the test plug. The test terminal block can be used with either make-before-break or break-before-make test plugs.
Our IEC 1492-compliant feed-through screw terminal blocks feature pin connections on one side of the terminal block. They are available in single-circuit or dual-deck, dual-circuit versions.
Our standard IEC Bulletin 1492 feed-through screw terminal blocks are designed for single-circuit feed-through terminals. These terminal blocks are available in several sizes and colors to accommodate various wire ranges and multiple-wire capabilities.