Certificates and Conformities
NIC/CEC
- Class I, Divisions 1 and 2, Groups B, C, D
- Class II, Divisions 1 and 2, Groups E, F, G
- Class III
- UL1203
- UL Listed ECP Enclosure File (E71278)
CSA standard
- cUL Listed to CSA C22.2 No. 30, 25
Environmental ratings
- NEMA 3, 3R, 4, 4X, 7BCD, 9EFG
- -20°C ≤ Ta ≤ +60°C
IECEx standards
- Ex db IIB + H 2 Gb
- Ex tb IIIC Db IP66
- -20°C ≤ Ta ≤ +60°C
- IECEx ETL 13.0022U
ATEX standards
- II 2 GD Ex db IIB + H 2 Gb
- Ex tb IIIC Db IP66
- -20°C ≤ Ta ≤ +60°C
- Certificate ITS13ATEX17813U
Design Features
- Available blank for maximum design flexibility
- International Certified Operators
- Factory drilled and tapped entries up to 3" in diameter
- Removable mounting plate with factory holes and threads
- Two nameplates for easy identification and on-site configuration
- Five starting size combinations
- Three case sizes with four workstations
- Custom built inhabited versions
- Factory wiring from the switch to the starter is provided for populated areas.
- UL/cUL certified for field addition of drilled and tapped entries on the sides, top, bottom, or rear of the enclosure
- Bolt-on and mortise-fitted mounting feet allow for easy replacement if damaged or broken.
- ATEX/IECEx certified enclosure option for use in global applications
Standard materials
- Body, lid and handle – copper-free aluminum
- Gasket – neoprene
- Lid and hinge bolts - stainless steel
- Mounting plate, fork plate and contact plate are aluminum
- Circuit breaker components - stainless steel