Uninterruptible power supplies (UPS)

• Robust industrial design
• Vertical/rack mounting
• Extended operating time
• Battery management system
• Possibility of replacing batteries without turning off the power
• Integrated network management
• Remote control/setup
• Double conversion in real time
• Pure sine wave output
• Frequency and voltage regulation
• Automatic internal bypass

Electrical parameters		1609-P3000N	1609-P3000A	1609-P5000E	1609-P8000E	1609-P10000E
Entrance	In nom.(AC)	120	230	208/230	208/230	208/230
	Voltage range, default (AC)	90 ... 150V	160 ... 280V
	Current (A)	20 nom., 28 max.	11 nom., 14 max.	19 nom., 24 max.	30 nom., 40 max.	39 nom., 48 max.
	Power	3000VA (2100W)		5000VA (3500W)	8000VA (6400W)	10,000 VA (8,000 W)
	Frequency	45 ... 65 Hz (self-definition)
	PFC	gt- 0.95
	Protection	N/A	N/A	N/A	70 input circuit breaker
Exit	In nom.	120V	208
	Power	3000VA (2100W)		5000VA (3500W)	8000VA (6400W)	10,000 VA (8,000 W)
	Protection	3 ... 15 Circuit breaker			N/A	N/A
From the battery	Frequency	Nominal +/- 3 Hz
	Reg.	+ / - 2% in static mode + / - 5% dynamic	+/- 1% in static mode, +/- 5% dynamic
	THD	lt-5% at full load
	Peak factor	3:01
Efficiency	From the battery	86%
	On Line	88%
Protection	Emission	IEC 1000-4-4
	Overload	125%: 1 minute, 150%: 30 seconds
	Output short-circuit current	Protection switches Input circuit and/or premises branch
	Thermal protection	Yes
	Bypass	N/A			70 input circuit breaker
Regulatory	Safety	UL 1778, CULUS, IEC 60950	EN 61000-3-2	UL 1778, CULUS, IEC 60950
	EMC	FCC (Class A)	EN50091-2	FCC (Class A), EN50091-2
	Marking	CULUS, CSA	CE	CULUS, CSA, CE
Battery	Opening hours	14 minutes at full load, 34 minutes at half load		5...7 minutes at full load, 13...18 minutes @ half load
	Type	Sealed Lead Acid, hot-swappable, user-replaceable valve
	Voltage	192V
	Charger	Temperature compensated current limited, float charger
	Reload time	In less than 3 hours to 90% capacity	Less than 3 hours to 85% capacity
	Term	2...4 years at 25 deg- C ambient temperature
Wednesday	Temperature	0 ... 40 deg- C (working), -20 ... 60 deg- C (short-term storage)
	Altitude	10,000 ft (working)
	Humidity	0 ... 95% non-condensing (operating)
	Thermal power (at full load)	655 BTU/hour		1040 BTU/hour	1536 BTU/hour	2216 BTU/hour
	Noise level	lt-50 dB @ 1 meter (at full load)	lt-55 dB @ 1 meter (at full load)
Back panel	AC outputs	(6) NEMA 5 ... 15 (2) NEMA 5 ... 20	(8) IEC C13 (2) IEC C19		(12) IEC C13 (2) IEC C19
	AC Inputs	NEMA L5 ... 30	IEC C14	IEC C20	3 position terminal blocks
Communication	DB9	Serial and contact closures
	EPO	By closing contacts
	Net	Via network management cards (1609-NMC, supplied as standard with 3 kVA units)
Indicators and controls	LED Status	Online, In bypass mode, from battery, overload and battery replacement, faults, Histogram for load, Histogram for battery Fuel level indicator, Histogram for measured input voltage when built-in switch is conducted
	Control	(Front Panel) On/Self Test/Silence Alarm/Cold Start/Boot
	Sound	On battery: 4 short beeps every 20 seconds (variable), Low battery: persistent 0.5 second beep every 1 second (variable), Bypass: continuous beep, Failure: continuous beep, Battery change: occasional on/off change - one beep

1609-B - Industrial Uninterruptible Power Supplies

• Robust industrial design
• DIN rail or back-of-panel
• Increased temperature performance (up to 50°C) is possible with an additional battery
• Bulletin 1609-B UPS requires two 12V batteries (order separately)

Electrical parameters		1609-B600N	1609-B1000N
Entrance	In nom.	120V	120V
	Power	600 VA (360 W)	1000 VA (600 W)
	Voltage range, default	96 ... 138V
	Voltage range, wide online	96 ... 138V
	Current No.	5.4	8.9
	Capacity Frequency	50/60 Hz plus minus 3 Hz	50/60 Hz plus minus 3 Hz
	PFC	None	None
Exit	In nom.	120V
	Power	600 VA (360 W)	1000 VA (600 W)
Online	Output voltage range, default	96 ... 138V
	Output voltage range, wide online	96 ... 138V
	Switching point accuracy	plusmn- 3%
From the battery	In nom	120V (wave step)
	Frequency	50/60 Hz plus/min - 1 Hz
	THD	47.5% (wave step)
Short circuit protection	Peak factor	2.5:1
Efficiency	From battery (typical under active load)	80% Typical under active load
	Internet - Typical for active metering load (AVR mode)	94% Typical under active load
Protection	Emission	380 J (Total performance rating with 10 * 1000 pulse s)
	Overload (Shutdown in 10 sec)	gt- 110 ... 130% - shutdown after 5 sec
	Overload (Shutdown immediately)	130% immediate shutdown
	Output short-circuit current: Internet	Parallel circuit premises from current overloads
	Output short-circuit current: batteries	Shutdown
	Thermal protection	UPS inside temperature sup3-70 deg- C
Regulatory	Safety	UL1778, CSA C22.2 No. 107.3-05, EN/IEC62040-1
	EMC	FCC amp- CE (Class A)
	Marking	UL, CULUS, FCC, CE, C-Tick
Battery	Opening hours	sup3-5 min (at 25 deg- C at full load = 360 W, PF = 0.6 ... 0.75)	sup3-2 min (at 25 deg- C at full load = 600W, PF = 0.6 ... 0.75)
	Type	Sealed lead acid battery
		12V/5Ah (for 0 ... 40 deg- C: BB BP5 ... 12)
		12V/5.5 Ah (for 0 ... 50 deg- C: BB HRL5.5 ... 12)
	Voltage	24V
	Charger	Current limited, constant voltage float charger
	Charger Time	Less than 12 hours to 90% capacity after discharge with full loading
	Term	2 ... 3 years at 25 deg- C ambient temperature
Wednesday	Temperature	Operating: Standard battery 0 ... +40 deg- C (+32 ... +104 deg- F) Hi-battery temperature 0 ... +50 deg- C (+32 ... +122 deg- F) In non-operating condition / Storage: -15 ... +45 deg- C (+5 ... +113 deg- F)
	Altitude	Operating: 0...6600 feet (0...2000 meters)
	Humidity	Operation / Storage 5 ... 95% RH (non-condensing)
	Thermal power	On Line, Full Load: 107 BTU/hr On line, full load, charging: 160 BTU per hour Battery Power: Full Load: 1228 BTUs per hour	On Line, Full Load: 178 BTU/hr On line, full load, charging: 231 BTU per hour Battery Power: Fully Loaded: 2047 BTUs per hour
	Noise level	lt-45 dBA @ 1 meter front side
Mechanical	Approximate dimensions L * W * H (mm)	6.1 x 11 x 7.09 (155 x 300 x 180)
	Approximate weight per pound (kg)	14.5 (6.6)	14.7 (6.7)

The Eaton 9SX UPS provides high availability, flexibility, and professional protection for IT equipment and infrastructure in small data centers, as well as networking devices, data storage systems, medical equipment, and telecommunications. Featuring double-conversion (online) technology and a versatile rack, tower, or rack/tower enclosure, the Eaton 9SX UPS offers a choice of two power supplies.

A modern graphical LCD display provides precise UPS operating parameters and measurement data on a single screen (available in seven languages, including Russian). The LCD display can be adjusted to provide the best viewing angle for various installation situations.

The 9SX integrates easily with leading virtualization environments and cloud orchestration tools using an optional network management card and Eaton Intelligent Power® software, compatible with all major operating systems.

If needed, battery life can be extended to several hours by adding additional hot-swappable external battery modules. The battery modules will be automatically recognized by the UPS.

The Eaton 93PM G2 UPS delivers power protection, cybersecurity, and business continuity in a flexible, efficient, and cost-effective modular and scalable design. The second-generation 93PM three-phase UPS offers the highest availability and lowest total cost of ownership in its class. This makes it the ideal solution for data center operators and organizations seeking to increase capacity and power protection to meet business needs.

The Eaton 93PM G2 UPS, with its flexible, modular, and scalable design, ensures maximum uptime for critical infrastructure. Its hot-swappable modular system allows for the addition of 50 or 60 kVA modules at any time, without disrupting the system or impacting the critical load. HotSync technology allows the Eaton 93PM G2 to eliminate a single point of failure in the event of a communication loss, ensuring increased device reliability. Additionally, this UPS features built-in safety components to reduce electrical risks and provide additional protection.

Equipped with EnergyAware technology, the Eaton 93PM G2 enables your organization to support the environment and generate revenue by responding to grid demand and providing ancillary services. Without compromising critical load protection, the average benefit from using this technology is up to €50,000 per MW of grid power per year.

The Eaton 93PM G2's cybersecurity is provided by Eaton's Gigabit and Industrial network interface cards—the first in the industry to receive IEC 62443-4-2 and UL 29001-1 certifications. Eaton also offers a remote monitoring service, enabling immediate response to any UPS threats related to power supply and cybersecurity.

The Eaton 93PM G2 UPS offers lower cost thanks to its higher efficiency thanks to built-in technologies, many of which are unique to Eaton products. The 93PM G2 can be scaled to meet business needs. It boasts 97% online efficiency for improved cost control and ROI. Performance can be further enhanced with ESS and VMMS technologies.