- 1-channel signal generator
- 24VDC power supply (power bus)
- Load cell input (full or half bridge)
- Output 0 mA...±20 mA or 0 V...±10 V
- 2 relay contact outputs
- Programmable high/low alarm
- Configurable using PACTware or keyboard.
- RS-485 interface
- Line Fault Detection (LFD)
Peripherals and components
- 1-channel signal generator
- Universal use with various power sources
- Scalable current or voltage input
- Output current or voltage
- Relay contact output
- Configurable via keyboard
- Line Fault Detection (LFD)
- 1-channel signal generator
- Universal use with various power sources
- Thermocouple, resistance thermometer, potentiometer or voltage input
- TC backup input
- Current output 0/4 mA ... 20 mA
- 2 relay contact outputs
- Configurable using PACTware or keyboard.
- Line Fault Detection (LFD) and Sensor Burnout
- Up to SIL 2 in accordance with IEC/EN 61508/IEC/EN 61511
- 2-channel signal generator
- 24VDC power supply (power bus)
- Thermocouple, resistance thermometer, potentiometer or voltage input
- Can be used as a signal splitter (1 input and 2 outputs)
- Current output 0/4 mA ... 20 mA
- Receiver or source mode
- Configurable using PACTware
- Line Fault Detection (LFD) and Sensor Burnout
- Up to SIL 2 in accordance with IEC/EN 61508/IEC/EN 61511
- 1-channel signal generator
- 24VDC power supply (power bus)
- Thermocouple, resistance thermometer, potentiometer or voltage input
- Current output 0/4 mA ... 20 mA
- Receiver or source mode
- Configurable using PACTware
- Line Fault Detection (LFD) and Sensor Burnout
- Up to SIL 2 in accordance with IEC/EN 61508/IEC/EN 61511
- 1-channel signal generator
- 24VDC power supply (power bus)
- Scalable current or voltage input
- Output current or voltage
- Relay contact output
- Configurable via keyboard
- Line Fault Detection (LFD)
- 1-channel signal generator
- 24VDC power supply (power bus)
- Thermocouple, resistance thermometer, potentiometer or voltage input
- TC backup input
- Current output 0/4 mA ... 20 mA
- 2 relay contact outputs
- Configurable using PACTware or keyboard.
- Line Fault Detection (LFD) and Sensor Burnout
- Up to SIL 2 in accordance with IEC/EN 61508/IEC/EN 61511
- 1-channel signal generator
- 24VDC power supply (loop powered)
- 2- or 3-wire Pt100 RTD input
- Output 4 mA ... 20 mA, selectable temperature linearization
- DIP switch selection ranges
- Detecting a sensor failure
- 1-channel signal generator
- 24VDC power supply (loop powered)
- Current or voltage input
- Output: 4...20 mA
- Potentiometer or DIP switch selection ranges
- Line Fault Detection (LFD)
- 1-channel signal generator
- 24VDC power supply (power bus)
- Thermocouple, resistance thermometer, potentiometer or voltage input
- Current output 0/4 mA ... 20 mA
- Receiver or source mode
- Configurable using PACTware
- Line Fault Detection (LFD) and Sensor Burnout
- Up to SIL 2 in accordance with IEC/EN 61508/IEC/EN 61511
- 2-channel signal generator
- 24VDC power supply (loop powered)
- Current input/output 0 mA ... 40 mA
- I/P or transmitter power supply
- Accuracy 1%
- Reverse polarity protection
- Up to SIL 2 in accordance with IEC/EN 61508
- 2-channel signal generator
- 24VDC power supply (loop powered)
- Current input/output 4 mA ... 20 mA
- transmitter power supply
- Accuracy 0.1%
- Reverse polarity protection
- Up to SIL 2 in accordance with IEC/EN 61508
- 1-channel signal generator
- 24VDC power supply (loop powered)
- Current input/output 4 mA ... 20 mA
- HART-IP or transmitter power supply
- Low voltage drop
- Line Fault Detection (LFD)
- Up to SIL 2 in accordance with IEC/EN 61508
- 1-channel signal generator
- 24VDC power supply (loop powered)
- Current input/output 4 mA ... 20 mA
- transmitter power supply
- Accuracy 0.1%
- Reverse polarity protection
- Up to SIL 2 in accordance with IEC/EN 61508
- 1-channel signal generator
- 24VDC power supply (power bus)
- Input for 2-wire SMART transmitters and current sources
- Output for 4 mA ... 20 mA or 1 V ... 5 V
- Case width 12.5 mm
- Connection via spring terminals with push-in technology.
- Up to SIL 2 in accordance with IEC/EN 61508