The ideal low-voltage distribution board for controlling lighting, heating, appliances, electric heat, motors, and similar circuits in harsh and corrosive environments. Built using our high-quality, field-proven Ex-CELL enclosures, the Crouse-Hinds XLPB Series panel board provides long service life, NEMA 4X protection, and ease of installation. Suitable for use in locations exposed to rough handling, moisture, dust, dirt, and corrosion.
Panel boards
Crouse-Hinds SynergEX EZFlex Series enclosures provide overcurrent and short-circuit protection for low-voltage power, lighting, and heating in hazardous areas such as refineries, chemical and petrochemical plants, mining, food processing, and corrosive and industrial processing facilities.
The new UL-certified SynergEX EZFlex panel is now available with the unique, patented EZFlex™ busbar design, which allows for breaker interchangeability and maximum circuit capacity in harsh and hazardous environments.
The SynergEX EZFlex components and main switch are completely sealed, preventing sparks or heat from igniting explosive atmospheres. These sealed components allow for lightweight enclosures for easy installation. SynergEX enclosures open in seconds with two quarter-turn screws, compared to over 70 bolts in traditional NEMA 7 enclosures.
Crouse-Hinds PowerPlus Series enclosures offer premium, factory-sealed and custom-sealed solutions for protecting and distributing electrical circuits for heat tracing, lighting, and power.
EXD explosion-proof power panels are used for branch circuit power distribution and circuit protection for motors, valves, pumps, lighting, heating, and more. Certified for use in Class I, Division 1, and Zone 1 hazardous locations, this panel solution is designed, engineered, and manufactured to be the safest and most reliable hazardous area control panel in the industry.
EXD explosion-proof power panels are used for branch circuit power distribution and circuit protection for motors, valves, pumps, lighting, heating, and more. Certified for use in Class I, Division 1, and Zone 1 hazardous locations, this panel solution is designed, engineered, and manufactured to be the safest and most reliable hazardous area control panel in the industry.
Crouse-Hinds PowerPlus Series enclosures offer premium, factory-sealed and custom-sealed solutions for protecting and distributing electrical circuits for heating, lighting, and power.
EPL explosion-proof lighting panels are used for branch circuit power distribution and circuit protection for motors, valves, pumps, lighting, heating, and more. Certified for use in Class I, Division 1, and Zone 1 hazardous locations, this panel solution is designed, engineered, and manufactured to be the safest and most reliable hazardous area control panel in the industry.
EPL explosion-proof lighting panels are used for branch circuit power distribution and circuit protection for motors, valves, pumps, lighting, heating, and more. Certified for use in Class I, Division 1, and Zone 1 hazardous locations, this panel solution is designed, engineered, and manufactured to be the safest and most reliable hazardous area control panel in the industry.
Crouse-Hinds PowerPlus Series enclosures offer premium, factory-sealed and custom-sealed solutions for protecting and distributing electrical circuits for heat tracing, lighting, and power.
D2L hazardous area lighting panels are used for branch circuit power distribution and circuit protection for motors, valves, pumps, lighting, heating, and more. Certified for use in Class I, Division 2, and Zone 2 hazardous locations, this panel solution is designed, engineered, and manufactured to be the safest and most reliable hazardous area control panel in the industry.
D2L hazardous area lighting panels are used for branch circuit power distribution and circuit protection for motors, valves, pumps, lighting, heating, and more. Certified for use in Class I, Division 2, and Zone 2 hazardous locations, this panel solution is designed, engineered, and manufactured to be the safest and most reliable hazardous area control panel in the industry.
Crouse-Hinds PowerPlus Series enclosures offer premium, factory-sealed and custom-sealed solutions for protecting and distributing electrical circuits for heat tracing, lighting, and power.
D2D hazardous area power panels are used for branch circuit power distribution and circuit protection for motors, valves, pumps, lighting, heating, and more. Certified for use in Class I, Division 2, and Zone 2 hazardous areas, this panel solution is designed, engineered, and manufactured to be the safest and most reliable hazardous area control panel in the industry.
D2D hazardous area power panels are used for branch circuit power distribution and circuit protection for motors, valves, pumps, lighting, heating, and more. Certified for use in Class I, Division 2, and Zone 2 hazardous areas, this panel solution is designed, engineered, and manufactured to be the safest and most reliable hazardous area control panel in the industry.
The Memshield 4 panel is designed to be a leader in security and provide unique features to support mission-critical systems in commercial and industrial buildings.
This panel system combines the highest level of electrical safety at a later stage with increased efficiency and reduced downtime thanks to off-the-shelf system components.
Memshield 4 is cost-effective, customizable, and optimized to reduce changeover time and install additional circuits. Memshield 4 meets the true spirit of BS EN 61439-2 requirements. Its design and layout are perfectly aligned with the existing Memshield 3 MCCB range.
This panel system combines the highest level of electrical safety at a later stage with increased efficiency and reduced downtime thanks to off-the-shelf system components.
Memshield 4 is cost-effective, customizable, and optimized to reduce changeover time and install additional circuits. Memshield 4 meets the true spirit of BS EN 61439-2 requirements. Its design and layout are perfectly aligned with the existing Memshield 3 MCCB range.
A complete range of MCCB panels and prefabricated trays, covering all your needs: from a simple panel to a comprehensive panel system. The range offers a variety of input devices and a wider selection of output paths to provide users with greater flexibility and choice. Specialized accessories for metering and surge protection are also available to complete the offering.
The Crouse-Hinds GUSC series explosion-proof circuit breaker load centers are used to create a centrally controlled switching system for a large number of feeder or branch circuits in a single compact unit to control lighting, heating, appliances, electrical heat tracing, motors and similar circuits.
Certified for use in areas hazardous due to the presence of flammable vapors, gases, or flammable dust, exposed to atmospheric influences, moisture, and corrosion. Ideal for indoor or outdoor installations in oil refineries, chemical and petrochemical plants, and other manufacturing facilities where similar hazards exist.
D2PB circuit breaker panels are designed specifically for indoor and outdoor use in Class I, Division 2 hazardous locations where flammable vapors or gases may be present due to accidents or emergencies. Common applications include oil refineries, chemical and petrochemical plants, and other manufacturing facilities.
Crouse-Hinds CEAG GHG66 Ex d IIC flameproof aluminium enclosures combine flameproof aluminium enclosures with Ex-e polyester powder coated steel terminal boxes suitable for tropical and marine climates.
Seven enclosure sizes can be combined into large distribution units, allowing the integration of built-in components up to 630 A and 690 V. Explosion-proof signal lamps, indication and control elements are integrated into junction and assembly boxes where required.
Crouse-Hinds CEAG GHG64 Ex d IIB explosion-proof enclosures are ideal for use on offshore oil platforms, chemical plants, refineries and other hazardous and harsh industrial environments.
Constructed of die-cast aluminum alloy, the GHG64 offers a modular, compact design with a wide operating temperature range of -55°C to +55°C. Unique, spring-loaded stainless steel hinges provide an opening angle of up to 110°, allowing multiple GHG64 panels to be installed side-by-side. Additional protective windows are available for viewing internal components.
GHG64 panel boards are available in 11 different enclosure sizes to meet specific customer needs. A wide range of industrial components can also be added, such as contactors, circuit breakers, RCDs, PLCs, wireless LANs, timers, electronic components, and terminal blocks.
Crouse-Hinds CEAG GHG 619 Series enclosures are designed for power, lighting and heating circuits in hazardous and harsh industrial environments such as offshore oil platforms, chemical and petrochemical plants.
Five Ex-e enclosure sizes provide ample space for any required modules: circuit breakers, RCDs, RCBOs, contactors, motor starters, overcurrent releases, star-delta time relays, or main switches. Our Ex-d modules easily snap into the GHG 619 enclosure using a snap-in guide, ensuring quick and secure installation and field replacement. A wide range of cable entries can be added directly to the enclosure or to screwless plastic or brass mounting plates.
GHG 619 panels are available in fiberglass-reinforced polyester and electropolished stainless steel. The fiberglass enclosures are fire-resistant according to UL94 VO. Additionally, lockable lid panels allow for operation without opening the enclosure.
Crouse-Hinds AGP17 ATEX and IECEx explosion-proof distribution boards are designed for distributing circuit breakers for lighting circuits, heating circuits, and receptacle distribution in Zones 1, 2, 21, and 22 hazardous locations.
The AGP17 is ideal for areas where moisture or corrosion may be a problem, such as offshore oil platforms, pharmaceutical and chemical plants, refineries, food processing plants and other industrial facilities.
AGP17 shields are available with housings made of glass reinforced polyester (GRP) or stainless steel (304/316L).
The AGP17 is ideal for areas where moisture or corrosion may be a problem, such as offshore oil platforms, pharmaceutical and chemical plants, refineries, food processing plants and other industrial facilities.
AGP17 shields are available with housings made of glass reinforced polyester (GRP) or stainless steel (304/316L).
Crouse-Hinds CEAG EJB and EJW IEC explosion-proof enclosures are designed for use in Zones 1 and 2 hazardous areas. Their modular design allows for easy integration into larger distribution systems, connected via explosion-proof cable entries.
EJB and EJW switchboards can be designed for wall mounting or freestanding installations, according to customer preference. A canopy is available for outdoor installations, providing additional protection from rain and sun.
EJB explosion-proof enclosures use a copper-free aluminum frame, while EJW enclosures are constructed of welded steel. All enclosures are coated with a gray epoxy resin suitable for tropical and marine climates. Hot-dip galvanized steel frames are also available for additional corrosion protection.