- 1-channel signal generator
- 24V DC power supply
- Thermocouple, resistance thermometer, potentiometer or mV input
- Input for PTC thermistor
- Output current and voltage
- Line Fault Detection (LFD) and Sensor Burnout
- Accuracy 0.1%
- Connection via screw terminals
Peripherals and components
- 1-channel signal generator
- 24V DC power supply
- Input for 2- or 3-wire sensors or AC/DC voltage sources.
- Relay contact output
- Timer function
- Configurable via DIP switches
- Connection via screw terminals
- 1-channel signal generator
- 24V DC power supply
- 2-wire input converters
- Input current and voltage sources
- Dual output 0/4 mA ... 20 mA, 0/1 V ... 5 V or 0/2 V ... 10 V
- Signal splitter (1 input and 2 outputs)
- Accuracy 0.1%
- Connection via screw terminals
- 1-channel signal generator
- 24V DC power supply
- 2-wire input converters
- Dual output 0/4 mA ... 20 mA
- Signal splitter (1 input and 2 outputs)
- Accuracy 0.1%
- Connection via screw terminals
- 1-channel signal generator
- 24V DC power supply
- Bipolar millivolt input sources
- Output bipolar current and voltage sources
- Accuracy 0.1%
- Configurable using DIP switches and potentiometer.
- Connection via screw terminals
- 1-channel signal generator
- 24V DC power supply
- Input bipolar current and voltage sources
- Output bipolar current and voltage sources
- Accuracy 0.1%
- Configurable using DIP switches and potentiometer.
- Connection via screw terminals
- 1-channel signal generator
- 24V DC power supply
- Input current and voltage sources
- Output current and voltage
- Accuracy 0.1%
- Configurable via DIP switches
- Connection via screw terminals
- 1-channel signal generator
- 24V DC power supply
- 2-wire and 3-wire input transducers and 2-wire current sources
- Output current and voltage
- Accuracy 0.1%
- Configurable via DIP switches
- Connection via screw terminals
- 1-channel signal generator
- 24V DC power supply
- 2-wire and 3-wire SMART input sensors and current sources
- Output 0/4 mA ... 20 mA
- Accuracy 0.1%
- Connection via screw terminals
- 1-channel signal generator
- 24VDC power supply (power bus)
- Output current at load up to 900 Ohm
- HART I/P and valve positioner
- Wire break monitoring
- Case width 12.5 mm
- Connection via spring terminals with push-in technology.
- Up to SIL 2 in accordance with IEC/EN 61508
- 1-channel signal generator
- 24VDC power supply (power bus)
- Output current at load up to 900 Ohm
- HART I/P and valve positioner
- Wire break monitoring
- Case width 12.5 mm
- Up to SIL 2 in accordance with IEC/EN 61508
- 1-channel signal generator
- 24VDC power supply (power bus)
- Input current and voltage
- 2 relay contact outputs
- Programmable high/low alarm
- Configurable using DIP switches and potentiometer.
- Terminal blocks with test sockets
- 2-channel signal generator
- 24VDC power supply (power bus)
- Thermocouple, resistance thermometer, potentiometer or voltage input
- Can be used as a signal splitter (1 input and 2 outputs)
- Output voltage 0/1 V ... 5 V
- Configurable using PACTware
- Line Fault Detection (LFD) and Sensor Burnout
- Up to SIL 2 in accordance with IEC/EN 61508/IEC/EN 61511
- 1-channel signal generator
- 24VDC power supply (power bus)
- Thermocouple, resistance thermometer, potentiometer or voltage input
- Output voltage 0/1 V ... 5 V
- Configurable using PACTware
- Line Fault Detection (LFD) and Sensor Burnout
- Up to SIL 2 in accordance with IEC/EN 61508/IEC/EN 61511
- 1-channel signal generator
- 24VDC power supply (loop powered)
- Thermocouple input
- Output 4 mA ... 20 mA
- Internal cold junction compensation
- Detecting a sensor failure
- DIP switch selection ranges