- 32-channel
- 24V DC power supply
- Interface for serial or parallel connection options
- Dual RS 485 connections
- HART multiplexer slot
Peripherals and components
- 4 x 8-channel
- 24V DC power supply
- Suitable for HART communication
- Dual RS 485 connections
- Used with HiD/HiC terminal blocks
- Power status LED indicator
- 2 x 16-channel
- 24V DC power supply
- Suitable for HART communication
- Dual RS 485 connections
- Used with HiD/HiC terminal blocks
- Power status LED indicator
- 32-channel
- 24V DC power supply
- HART Field Device Input (Versions 5-7)
- RS-485 interface
- Up to SIL 3 in accordance with IEC/EN 61508
- Schneider Electric Tricon Series System Board by Triconex
- HART Connection Board (ETP) for Tricon AO Module
- For 8-channel card AO 3805E
- 8-channel
- Field side: removable screw terminals, green.
- Control side: ELCO socket, 56-pin.
- Schneider Electric Tricon Series System Board by Triconex
- TAN48 approval
- HART Connection Board (ETP) for Tricon v10 AI Module
- For 16-channel AI 3700, 3700A, 3703E and 3721 cards.
- 16-channel
- Field side: removable screw terminals, green.
- Control side: ELCO socket, 56-pin.
- Connection board for the K-System HART multiplexer
- 16-channel
- Interface for serial or parallel connection
- Built-in 220 ohm switchable resistor.
- Connection via screw terminals
- 16-channel
- 24VDC power supply (power bus)
- HART Field Device Input (Versions 5-7)
- Up to 15 KFD0-HMS-16 slave devices can be connected.
- Up to SIL 3 in accordance with IEC/EN 61508
- 16-channel
- No external power required
- HART Field Device Input (Versions 5-7)
- Used with the KFD2-HMM-16 HART Master Multiplexer.
- Up to SIL 3 in accordance with IEC/EN 61508
- 1-channel isolated barrier
- 24VDC power supply (power bus)
- HART field device input with transmitter power supply
- Can be used as a signal splitter (1 input and several outputs)
- 4 relay contact outputs (NO contact)
- 3 analog outputs 4 mA ... 20 mA
- Output in receiver and source mode
- Configurable via keyboard
- 1-channel isolated barrier
- 24VDC power supply (power bus)
- HART field device input with transmitter power supply
- Can be used as a signal splitter (1 input and several outputs)
- 3 analog outputs 4 mA ... 20 mA
- Output in receiver and source mode
- Configurable via keyboard
- 1-channel signal generator
- 24V DC power supply
- Input for 2- or 3-wire sensors
- Input frequency 10 MHz ... 50 kHz
- Relay contact output
- Block launch and prevent restart
- Configurable via DIP switches and software.
- Connection via screw terminals
- 1-channel signal generator
- 24V DC power supply
- Input bipolar current and voltage sources
- Relay contact output
- Accuracy 0.1%
- Restart prohibition
- Single shot function
- Configurable via DIP switches and software.
- Connection via screw terminals
- 2-channel signal generator
- Powered from the field side circuit
- Current input/output 0/4 mA ... 20 mA
- Accuracy 0.1%
- Reverse polarity protection
- Connection via screw terminals
- 1-channel signal generator
- Powered from the field side circuit
- Current input/output 0/4 mA ... 20 mA
- Accuracy 0.1%
- Reverse polarity protection
- Connection via screw terminals